Fujitsu PRIMERGY TX2540 M1

364 Upgrade and Maintenance Manual TX2540 M1
System board and components
14.5.2 Removing the onboard SAS enabling key
14.5.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
14.5.2.2 Removing the onboard SAS enabling key
Figure 276: Removing the onboard SAS enabling key
Ê Firmly pull up on the release lash until the onboard SAS enabling key pops
out of its connector.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less