7.5.3 Replacing the SAS expander board
7.5.3.1 Preliminary steps
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
Ê "Removing the system fan holder" on page 74
7.5.3.2 Removing the defective SAS expander board
Ê Remove the SAS expander board as described in section "Removing the
SAS expander board" on page 202.
7.5.3.3 Installing the new SAS expander board
Ê Install the SAS expander board as described in section "Installing the SAS
expander board" on page 195.
Ê Reconnect all cables on the SAS expander board to their original positions.
7.5.3.4 Concluding steps
Ê "Installing the system fan holder" on page 75
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: tool-less
To Next Page
Loading...
