Fujitsu PRIMERGY TX2540 M1

TX2540 M1 Upgrade and Maintenance Manual 153
Hard disk drives / solid state drives
7.2.7.2 Removing a 2.5-inch HDD / SSD module
Ê Remove the HDD / SSD module to be replaced from the server as described
in section "Removing a 2.5-inch HDD / SSD module" on page 150.
7.2.7.3 Installing a 2.5-inch HDD / SSD module
Ê Install the new HDD / SSD module into the empty drive bay as described in
section "Installing 2.5-inch HDD / SSD modules" on page 146.
7.2.7.4 Concluding steps
Ê "Installing accessible drive and HDD bay covers" on page 69
Ê "Performing a RAID array rebuild" on page 102
7.2.8 Replacing a 2.5-inch HDD SAS backplane
7.2.8.1 Preliminary steps
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
Ê "Removing the system fan holder" on page 74
Ê "Removing 2.5-inch HDD / SSD modules" on page 149
Upgrade and Repair Unit
(URU)
Hardware: 15 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver