Figure 200: Close the socket release lever
Ê Close the socket release (1) lever and latch it under the load plate retention
tab to lock down the load plate (2).
11.3.3 Concluding steps
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê If applicable, "Updating or recovering the system board BIOS and iRMC" on
page 85
Ê "Switching on the server" on page 73
Ê "Enabling SVOM boot watchdog functionality" on page 96
Ê "Enabling BitLocker functionality" on page 101
Ê "Resetting the error status after replacing memory modules or processors"
on page 93
To Next Page
Loading...
