12.6.2.3 Concluding steps
Ê "Installing an HDD extension box" on page 183
Ê "Installing the system fan holder" on page 75
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
12.6.3 Replacing the slimline ODD
12.6.3.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Removing backup and optical disk media" on page 80
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
I Removing the front cover is not required in order to replace the
slimline ODD or LSD module in the 2x 3.5-inch HDD extension box.
Ê "Removing the system fan holder" on page 74
Ê "Removing an HDD extension box" on page 190
12.6.3.2 Removing the defective slimline ODD
Ê Remove the slimline ODD from the 4x 3.5-inch HDD extension box as
described in section "Removing the slimline ODD" on page 329.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
To Next Page
Loading...
