Fujitsu PRIMERGY TX2540 M1 - Onboard Settings; Jumper Setting

TX2540 M1 Upgrade and Maintenance Manual 419
Appendix
I The meaning of further buttons is described in the operating manual of
your server.
17.3 Onboard settings
Figure 323: Onboard settings
Jumper Setting Description
SKP RCVR
Default Password delete and Recovery BIOS
options disabled
Password Skip
enabled
This jumper setting will permanently
delete the current BIOS password and
apply default BIOS settings.
Recovery BIOS
enabled
Recovery BIOS enabled
WP
Default (no jumper) BIOS Write Protect disabled
BIOS Write Protect
enabled
BIOS Write Protect enabled
INDICATE
CSS
FAN 1
FAN 2
TPM
MLC1
1
WP
SATA 1
SATA 2
USB 2 USB 1
Front Panel
P5
PCH
SMB
Intrusion
switch
P3
iRMC
Slot 1 PCI 32/33
Slot 2 PCIe x4 (x8 conn)
Slot 3 PCIe x4 (x8 conn)
2
nd
RAID
SKP RCVR
Password Skip
enabled
Setting
SKP RCVR
Password Skip/
Recovery BIOS
Jumper Description
WP
BIOS Write
Protect
1
Default
1 1
Recovery BIOS
enabled
Default (no jumper)
BIOS Write Protect
enabled
Jumper settings