Fujitsu PRIMERGY TX2540 M1 - Concluding Steps

TX2540 M1 Upgrade and Maintenance Manual 359
System board and components
Figure 272: Removing the TPM spacer
Ê Using a flat nose pliers, press together the hooks on the TPM spacer (see
close-up) and remove it from the system board.
I If the TPM is to be replaced, the TPM spacer may remain on the
system board.
14.4.2.3 Concluding steps
Ê "Installing the new system board" on page 372
Ê "Installing the system fan holder" on page 75
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73