Fujitsu PRIMERGY TX2540 M1 - Installing the New UFM

350 Upgrade and Maintenance Manual TX2540 M1
System board and components
14.3.3.3 Installing the new UFM
Figure 261: Preparing the new UFM
Ê Remove the nylon screw from the new UFM (1).
Ê Remove the UFM spacer (2).
Figure 262: Installing the UFM (A)
Ê Fit the UFM on the UFM connector and the remaining UFM spacer.
Figure 263: Installing the UFM (B)
Ê Secure the UFM to the UFM spacer with the nylon screw.