EasyManua.ls Logo

Fujitsu PRIMERGY TX2540 M1

Fujitsu PRIMERGY TX2540 M1
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX2540 M1
Upgrade and Maintenance Manual 73
Basic hardware procedures
4.7 Switching on the server
V CAUTION!
Before switching on the server, make sure the top / side cover is
closed. In order to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and satisfy cooling
requirements, the server must not run while the top / side cover is
removed.
Follow the safety instructions in chapter "Important information" on
page 33.
Ê Press the On / Off button to start up the server.
Ê Ensure that the power-on indicator above the On / Off button is lit green.
Ê Perform the required procedures described in the concluding steps of each
upgrade or maintenance task.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX2540 M1

Related product manuals