Fujitsu PRIMERGY TX2540 M1 - Concluding Steps; Replacing the Onboard SAS Enabling Key; Preliminary Steps

TX2540 M1 Upgrade and Maintenance Manual 365
System board and components
14.5.2.3 Concluding steps
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
Ê "Enabling BitLocker functionality" on page 101
14.5.3 Replacing the onboard SAS enabling key
14.5.3.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 77
Ê "Locating the defective server" on page 45
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
14.5.3.2 Replacing the onboard SAS enabling key
Ê "Removing the onboard SAS enabling key" on page 364
Ê "Installing the onboard SAS enabling key" on page 362
14.5.3.3 Concluding steps
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
Ê "Enabling BitLocker functionality" on page 101
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less