Ê If applicable, install SFP+ transceiver modules to the expansion card as
described in sections "Installing SFP+ transceiver modules" on page 225.
Ê If applicable, connect a BBU or FBU to the expansion card as described in
sections "Installing a BBU" on page 244 or "Installing an FBU" on page 249.
9.4.1.4 Concluding steps
Ê "Reassembling" on page 62
Ê Reconnect all external cables to the replaced expansion card.
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
Ê "Updating RAID controller firmware" on page 88
Ê If applicable, "Enabling Option ROM scan" on page 89 .
Ê "Enabling SVOM boot watchdog functionality" on page 96
Ê "Enabling BitLocker functionality" on page 101
Ê If applicable,"After replacing / upgrading LAN controllers" on page 105
9.4.2 Removing expansion cards
9.4.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 48
Ê Remove all external cables from the expansion card to be removed.
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
