TX2540 M1
Upgrade and Maintenance Manual 379
15 Converting a tower model to a
rack model
Safety notes
For further information, please refer to chapter "Important information" on
page 33.
15.1 Preliminary steps
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê Remove all external cables.
Ê "Getting access to the component" on page 49 including "Removing the
front cover" on page 59
I The front cover is no longer required.
Ê "Removing the anti-tilt bracket" on page 75
Upgrade and Repair Unit
(URU)
Hardware: 20 minutes
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
To Next Page
Loading...
