Figure 185: Installing memory modules (B)
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.3 Concluding steps
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Updating or recovering the system board BIOS and iRMC" on page 85 (if
applicable)
Ê "Switching on the server" on page 73
Ê "Enabling SVOM boot watchdog functionality" on page 96
Ê "Verifying the memory mode" on page 97 (if applicable)
Ê "Enabling BitLocker functionality" on page 101
To Next Page
Loading...
