Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Upgrade and Maintenance Manual TX2540 M1
Version history
Version history
Issue number Reason for update
1.0 / March 2014 Initial release
2.0 / August 2014
Hot-plug PSU 800 W (Titanium) added, updated
power-on indicator modes, updated charging
duration for deeply discharged BBUs
3.0 / December 2014
Added hint for LTO3 cabling, revised cable plans,
revised sections related to BitLocker functionality,
added section "Resetting the error status after
replacing memory modules or processors", added
iRMC-related status signals

Fujitsu PRIMERGY TX2540 M1 Specifications

General

Processor socket	-
Intel Xeon series	E5-2400
Built-in processor	No
Motherboard chipset	Intel® C602
Number of processors supported	2
Number of DIMM slots	12
Supported memory types	DDR3-SDRAM
Maximum internal memory	192 GB
RAID levels	0, 1, 10
Hot-swap HDD bays	Yes
Storage drive sizes supported	3.5 \
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA, Serial Attached SCSI (SAS)
LAN controller	Intel I210
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB 2.0 ports quantity	6
Chassis type	Tower
Product color	Black