V CAUTION!
Installed LTO drive: ensure that the power cables are routed under the
cant of the LTO drive and have no contact with the LTO drive.
Figure 59: Routing power cables with installed LTO drive
Ê Install the hot-plug PSU(s) as described in "Installing a hot-plug PSU" on
page 122.
Ê If one of the PSU bays remains empty, install the PSU dummy cover as
described in "Installing a PSU dummy cover" on page 125.
6.4.4 Concluding steps
Ê "Installing the system fan holder" on page 75
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Enabling BitLocker functionality" on page 101
To Next Page
Loading...
