14.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 356.
Ê Leave the TPM spacer on the system board when removing the TPM.
14.4.3.3 Installing the new TPM
Ê Install the TPM as described in section "Installing the TPM" on page 352.
14.4.3.4 Concluding steps
Ê "Installing the system fan holder" on page 75
Ê "Reassembling" on page 62
Ê "Connecting the server to the mains" on page 72
Ê "Switching on the server" on page 73
Ê "Enabling BitLocker functionality" on page 101
14.5 Onboard SAS enabling key
14.5.1 Installing the onboard SAS enabling key
14.5.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 77
Ê "Locating the defective server" on page 45
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 48
Ê "Getting access to the component" on page 49
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
