iRMC-related status signals
11
Power-on
indicator
green on server is switched on and running
orange on
server is switched off, but mains
voltage is present (standby mode)
With firmware version 7.3.x, two new operating
conditions are indicated: iRMC booting and power-on
delay.
yellow / orange
flashing
iRMC booting
I After connecting the server to
the mains (power cord plugged
in / after mains failure) the iRMC
will boot. The system cannot be
switched on, until the iRMC boot
sequence is complete. During
this time, the power-on indicator
will flash yellow / orange.
yellow on
Power-on delay
I After shutting down, the server
cannot be switched on again
right away. If the On / Off button
is pressed right after shutting
down the server, the power-on
indicator will light up yellow until
the delay period ends and the
server will boot.
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
blue flashing orange flashing
An emergency flash of the iRMC
firmware is in progress.
Pos. Indicator Status Description
To Next Page
Loading...
