Operator Controls
LOGIQ 7 Basic User Manual 3-49
Direction 2392206-100 Rev. 1
Mode/Function Specific Controls
In general, the key status is indicated at the top of the key. There
are different types of Touch Panel keys as illustrated below:
Figure 3-25. Mode/Function Specific Controls
1. Toggle keys are used when the choices are on/off.
2. Select functions are used where the available functions are
listed on the key (not shown).
3. Two-Button functions are used when there are two choices
that do not include on/off (not shown).
4. Progress/Select keys are used for controls that have three
or more choices. When this key is selected, a pop-up menu
appears with the available choices.
5. Progression keys are used to assess the impact of the
control on the image progressively.
6. Sub-menu keys are used to bring up an additional menu.
1
4
5
6
To Next Page
Loading...
Need help?
General
