OB-Multigestational
LOGIQ 7 Basic User Manual 9-63
Direction 2392206-100 Rev. 1
Multiple Fetus
LOGIQ 7 allows you to measure and report multiple fetus
development. The system can report a maximum of four
fetuses.
To enter the number of fetuses
If more than one fetus is imaged during the exam, enter the
number of fetuses in the Patient Data Entry Menu.
Figure 9-17. Fetus Number
When you start an OB exam, the system automatically fills in the
Fetus # field with 1. To change the number:
1. Move the cursor to the fetus number and press Set twice.
The number is highlighted.
2. Type the correct number and press Set.
The system displays a message to confirm that you want to
change the fetus number.
3. Select Yes.
To Next Page
Loading...
Need help?
General
