Optimizing B-Mode
LOGIQ 7 Online Help 5-23
Direction 2392536-100 Rev. 1
Colorize
Description Colorize is the colorization of a conventional B-Mode image or
Doppler Spectrum to enhance the user's ability to discern B, M,
and Doppler Mode intensity valuations. Colorize is NOT a
Doppler Mode.
NOTE: You can colorize realtime or CINE images or Timeline CINE, but
not VCR images.
Colorizes the gray scale image to enhance the eye's
discrimination capability.
Spectrum Colorize colorizes the spectrum as a function of
power using the inverse of the Colorize map for the signal
intensity in each Doppler line.
Colorize enhances the visibility of the spectrum's characteristics
and enhances your ability to identify spectral broadening and
the edge contours of the spectrum used to define the peak
frequency/velocity.
The gray bar displays while Colorize is activated.
Adjusting To activate Colorize,
1. Select Colorize on the Touch Panel.
2. Trackball to cycle through available maps.
3. Press Set to select.
To deselect, select a gray map.
To Next Page
Loading...
Need help?
General
