Optimizing Color Flow
LOGIQ 7 Online Help 5-85
Direction 2392536-100 Rev. 1
Directional Power Doppler
You can select the P7 Directional Power Doppler map while in
PDI.
NOTE: If you store a PDI image and recall it, you can still switch to the
Directional Power Doppler map and vice versa. However, an
image stored as non-directional then switched to directional just
adds direction to a non-directional map and vice versa.
HINTS
If the image is aliasing, increase the PRF and reduce the Wall
Filter.
To Next Page
Loading...
