GE LOGIQ 7

Customizing Your System
16-4 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
System Presets
Overview
System presets allows you to view or change the following
parameters
• General – Location, Date/Time, Patient Info, Key Usage,
and Utility configuration
• System Imaging – CINE Loop Store, Cardiac, Biopsy
Guides, and Image Control and Display configuration
• System Measure – Measurement, Cursor, and Results
Window configuration
• Backup/Restore – Backup, Media, EZBackup/Move,
Detailed Restore of User Defined.
• Peripherals – Video Settings, VCR, Print and Store
Options, and Setup configuration
• About – System software, patent, and image information
Changing system parameters
To change system parameters:
1. On the Touch Panel, select Utility.
2. On the Touch Panel, select System.
The System screen is displayed.
3. On the monitor display, move the Trackball to select the tab
that has the information you want to change.
4. Select values for the parameters you want to change.
5. To save the changes, select the Save button. Select Exit to
return to scanning. In some cases, you may need to reboot
the system for the change to take effect.