Stress Echo
LOGIQ 7 Basic User Manual 10-107
Direction 2392206-100 Rev. 1
Analysis
Analysis consists of viewing previously saved loops and
assigning scores to each cardiac segment, in order to quantify
the function of the muscle or wall segment.
Depending on the protocol configuration, the analysis stage can
start manually or automatically after completion of the stress
test. In this case, the usual procedure consists of sequentially
opening all image groups (if defined) and performing scoring
from image to image.
The quad screen is the standard display for comparing heart
cycles. The heart cycle loops in the display are synchronized to
enable comparison. Each loop in the quad screen can be
magnified, using the zoom control.
Image Selection for Analysis
Images can be selected manually or from a pre-defined group in
the Protocol screen.
To Next Page
Loading...
Need help?
General
