GE LOGIQ 7 Basic User Manual

Beginning an Exam
LOGIQ 7 Basic User Manual 4-3
Direction 2392206-100 Rev. 1
Beginning a New Patient
Pressing the Patient Touch Panel key displays the Patient
Screen on the monitor. This screen is also accessible from the
Patient key on the control panel.
Figure 4-1. Patient Touch Panel
New Patient should be selected at the beginning of each new
patient exam. End Exam should be pressed at the end of each
exam. Pressing New Patient automatically erases all patient
data, annotations, measurements, calculations and worksheets
of the last exam. Images are not automatically erased. A
warning message appears regarding images being erased or
saved. It is always best to select “Save All” if you are unsure of
saving. Exams and patients can always be erased later.
NOTE: If the current patient does not exist, pressing Patient activates
the Patient Search screen.
NOTE: If the current patient exists, pressing Patient activates the Exam
History screen.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English