Cardiology
10-8 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Cardiac Measurements
This section lists cardiac measurements and the steps to
perform them. The measurement information in this section is
organized by mode, then by region of interest, and then by type
of measurement. The organization is as follows:
• Mode; there is a section for B-Mode, M-Mode, Color Flow
Mode, and Doppler Mode. There is also a Combination
Mode section, which includes calculations that are a result
of measurements made in more than one mode.
• Within each mode section, there are sections for region of
interest, such as aorta or mitral valve.
• Within each region of interest section, there are sections for
type of measurement, such a one distance, two distance,
trace, or velocity flow trace. Each measurement type section
lists all cardiac measurements that are that type, and then
describes the steps to perform that type of measurement.
Some measurements, such as Aortic Root Diameter or Aortic
Valve Cusp Separation, can be made in B-Mode or M-Mode.
The information for these measurements is included in both B-
Mode and M-Mode sections.
To Next Page
Loading...
Need help?
General
