General Measurements and Calculations
7-24 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Specifying Which Measurements Go in a Study or Folder
The Folder section of the Measurement & Analysis screen has
two lists of folders and measurements. This is where you specify
which items go in a study or folder.
• Available folders and measurements. The left list
contains all possible folders and measurements for the
selected study or folder.
• Measure & Study. The right list has all folders and
measurements currently selected for the study or folder.
These are selected from the Available folders and
measurements list. These are the folders and
measurements you see when you are scanning and choose
an exam category. This also defines where the folder or
measurement is located on the Touch Panel, based on the
number in this list.
To Next Page
Loading...
Need help?
General
