Configuring Connectivity
LOGIQ 7 Basic User Manual 16-73
Direction 2392206-100 Rev. 1
Connectivity Functions
To set up your institution’s connectivity, you must login with
administrator privileges.
1. TCPIP: allows you to configure the Internet Protocol.
2. Device. allows you to set up devices.
3. Services: allows you to configure a service (for example,
DICOM services such as printers, worklist, and other
services such as video print and standard print) from the list
of supported services. This means that the user can
configure a device with the DICOM service(s) that particular
device supports.
4. Dataflow: allows you to adjust the settings of the selected
dataflow and associated services. Selecting a dataflow
customizes the ultrasound system to work according to the
services associated with the selected dataflow.
5. Buttons: allows you to assign a pre-configured output
service (or a set of output services) to the Print keys on the
control panel.
6. Removable Media: enables formatting (DICOM, database,
or blank formatting) and DICOM verification of removable
media.
7. Miscellaneous: allows you to set up the patient exam menu
options, print and store options, and the order of the
columns in the examination list on the Patient menu.
Configure these screens from left to right, starting with the Tcpip
tab first.
NOTE: The ultrasound system is pre-configured for many services, with
default settings selected. You can change these services and
settings as needed.
To Next Page
Loading...
Need help?
General
