GE LOGIQ 7 Basic User Manual

Recording Images
15-4 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Adding Devices
To add a destination device (printer, worklist server, etc.) to this
system, see Chapter 16.
To verify a DICOM device, see Chapter 16.
Adding a Dataflow
To add a new dataflow to this system, see Chapter 16.
Adding Devices to a Print Button
To add devices/dataflows to a print button, see Chapter 16.
Formatting Removable Media
To format removable media, see Chapter 16.
Using the DICOM Spooler
To monitor/control DICOM jobs, press F4. You can view, resend,
redirect, and delete images from the DICOM spooler by
selecting a job, then specifying the action to be performed on
this job.
Troubleshooting
To troubleshoot connectivity on this system, see Chapter 16.
To verify that a service is connected to the network, see Chapter
16.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English