Scanning/Display Functions
6-12 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Adding Comments to an Image
Annotation Retention
Annotations from the B-Mode images are retained and carried
over when switching to multi-image format or duplex mode.
The position of the comments is adjusted so that it is at the
same relative position with respect to the display window in the
new format as it was in the single image format.
NOTE: Annotations may not be retained when the image is switched to
M-Mode image format depending on the preset.
Arrows and Pointers
Arrows and pointers can be used by activating the F2 (Arrow)
key on the keyboard. When the pointer comes up, it is a GREEN
color, indicating it is active and can be moved.
• Move the pointer using the Trackball to any place on the
screen. The pointer head direction can be controlled by how
the trackball is moved.
• To readjust the length and thickness of the pointer, use the
Arrow Resize rotary control. The default for the pointer size
can be preset.
• Press Set to fix the place of the pointer and direction of the
pointer head. The GREEN color turns to YELLOW (or the
default color if changed).
• To delete all arrow marks, press the Clear key right after
pressing the F2 (Arrow) key.
NOTE: This action clears the arrows only, not the comments on the
screen. To erase all annotations as well as arrows, press the
Clear key right after the Comment key.
To Next Page
Loading...
Need help?
General
