Preparing the System for Use
3-24 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
System Positioning/Transporting
Moving the System
When moving or transporting the system, follow the precautions
below to ensure the maximum safety for personnel, the system,
and other equipment.
Before moving the system
1. Press the Power On/Off switch to power off. See ‘Power
Off’ for more information.
2. Unplug the power cord.
3. All cables from off-board peripheral devices (IIE camera,
external printer, VCR, etc.) must be disconnected from the
console.
4. Disconnect the footswitch from the console.
5. Ensure that no loose items are left on the console.
6. Wind the power cable around the cable hook below the rear
handle or wrap the cord in a bundle and store it behind the
rear storage panel.
CAUTION
Please ensure that the peripheral devices, which are
installed in the storage areas, are secured with the
supplied straps.
To Next Page
Loading...
Need help?
General
