Customizing Your System
16-74 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
TCPIP
This configuration category enables users with administrative
rights to set the TCPIP for the system and connected remote
archive.
1. Type the name of the Ultrasound system in the Computer
Name field.
2. In the IP settings section, identify the ultrasound system to
the rest of the network by one of the following:
• DO NOT enable DHCP.
• Type the IP-Address (acquire unique static IP address
from hospital network administrator), Subnet Mask, and
Default Gateway (if applicable).
3. Select Save settings.
4. Re-boot the ultrasound system.
To Next Page
Loading...
Need help?
General
