GE LOGIQ 7

Probe Discussion
LOGIQ 7 Online Help 17-21
Direction 2392536-100 Rev. 1
Probe Discussion
Introduction
The LOGIQ 7 supports the following types of probes:
• Active Matrix Array (Convex and Linear). Active Matrix
Array probes are usually designated by the prefix/suffix"M".
• Curved Array (Convex). Curved Array (Convex) probes,
including `micro' convex, are usually designated by the
prefix/suffix "C"; the endocavity probe is designated by the
prefix/suffix "E".
• Linear Array. Linear Array probes are designated by the
prefix/suffix "L"; the linear intra-operative probes are
designated by the prefix/suffix "I" or "T".
• Phased Array Sector. Phased Array Sector probes are
designated by the prefix/suffix "S"; the biplane TEE probe is
designated by the prefix/suffix "B"; the multi-plane TEE
probe is designated by the prefix/suffix "P".
• Continuous Wave Doppler. Continuous Wave Doppler
probes are designated by the prefix/suffix "CWD".