Safety Precautions
LOGIQ 7 Basic User Manual 2-5
Direction 2392206-100 Rev. 1
Patient Safety
Related Hazards
Patient
identification
Always include proper identification with all patient data and
verify the accuracy of the patient's name and ID numbers when
entering such data. Make sure correct patient ID is provided on
all recorded data and hard copy prints. Identification errors could
result in an incorrect diagnosis.
Diagnostic
information
Equipment malfunction or incorrect settings can result in
measurement errors or failure to detect details within the image.
The equipment user must become thoroughly familiar with the
equipment operation in order to optimize its performance and
recognize possible malfunctions. Applications training is
available through the local GE representative. Added
confidence in the equipment operation can be gained by
establishing a quality assurance program.
WARNING
The concerns listed can seriously affect the safety of patients
undergoing a diagnostic ultrasound examination.
CAUTION
Allowing the machine to transmit acoustic output with the probe
not in use (or in its holder) can cause the transducer to build up
heat. Always turn off acoustic output or freeze the image when
not in use. The system’s acoustic output remains transmitting
when the user controls are being used.
To Next Page
Loading...
Need help?
General
