Recording Images
15-2 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Getting Set Up to Record Images
Overview
A typical workflow for connectivity might be as follows (this setup
varies by each user setup):
• Select the dataflow, worklist for example.
• Start a new exam. Select the patient.
• Perform the patient scan.
• Store images as multi-frame CINE Loops and Raw DICOM
data via the P1 button.
• Store secondary capture for DICOM print via P2.
• Store images to the color printer via P3.
• Store images to the black and white printer via P4.
• Check the DICOM Job Spooler via F4 to verify delivery.
• End the exam.
• Permanently store images via the Patient menu.
To Next Page
Loading...
