ReportWriter
14-6 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Editing Data
Changing Patient Data
1. Use the Trackball to move the cursor to the Data field you
want changed.
2. Press Set.
3. The original location of the data is displayed. Change the
existing data as necessary.
4. Select Report when completed.
Entering free text
1. Move the cursor where the free text is to be inserted and
press Set.
NOTE: Free text can be entered only into the field set as free text in
the Report Designer.
2. Enter free text using the alphanumeric keyboard.
To Next Page
Loading...
Need help?
General
