General Measurements and Calculations
7-52 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Manual Calcs Presets
The system allows you to preset the parameters for manual
calculations. You specify the parameter values on the Doppler
tab of the Measurement & Analysis screen.
1. On the Touch Panel, select Utility.
2. On the Touch Panel, select Measure.
3. On the monitor display, select the Doppler tab.
Figure 7-29. M&A Doppler Preset Menu
M&A Category: Display and select current exam category.
To Next Page
Loading...
