GE LOGIQ 7

Measurement and Calculation Setup
LOGIQ 7 Basic User Manual 7-51
Direction 2392206-100 Rev. 1
M&A Advanced Preset (continued)
4. To select an exam category, select it from the M&A category
list.
The Parameters list displays parameters for the selected
category.
5. To select a value for a parameter, select it from the Value
list.
• Doppler Default Method: Aveg., Max, Min or Last
• Doppler Trace Cycles: 1, 2, 3, 4 or 5
• Heart Rate Cycle: 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10
• Start M&A on a Freeze (B, M or D): Off, On or Caliper
Off: Select measurement manually on Freeze.
On: Measurement menu appears automatically on
Freeze.
Caliper: Measurement menu and caliper appear
automatically on Freeze.
• RI Calc Bidirectional Flow: On or Off
• RI Calc Method: MD or ED
• Keep Result Window: On or Off
• Trace: Auto or Manual
• VOL Flow Method: TAMEAN or TAMAX