System Presets
LOGIQ 7 Basic User Manual 16-17
Direction 2392206-100 Rev. 1
System/System Imaging Preset Menu
The System/System Imaging screen allows you to specify
parameters for cine loop storage and display, patient
information, key usage, and image control and display.
Figure 16-14. System/System Imaging Preset Menu
Table 16-6: Cine Loop Store
Preset Parameter Description
Time span (no ECG)
[s]
Select the number of seconds of CINE Loop
storage (no ECG). The default is 3 seconds
(approximately 77 B/W frames, 97 Color Frames).
Preview loop before
store
When selected, allows you to review cine loops
before storage.
Table 16-7: Cardiac
Preset Parameter Description
Time before heart
cycle [ms]
Sets the total storage time span of the cine loop in
ECG mode.
Time after heart cycle
[ms]
Sets the total storage time span of the cine loop in
ECG mode.
Time span of systole
[ms]
The default systolic time to enable synchronization
of cine loops.
To Next Page
Loading...
Need help?
General
