Cardiology
10-106 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Assigning a cine
loop to a view
(continued)
3. Use the Trackball to select the required view name.
4. Press Set.
The name of the view displays above the timers in the
window.
5. Repeat steps 1 through 4 to assign loops to the other views
of the level.
6. Press Done when complete.
A dialogue window displays asking whether the entire
Continuous Capture acquisition should be saved.
7. Press Delete to discard the loop or press Store all to keep
the entire loop.
The normal procedure is to discard the loop. The loop is
very big and requires a lot of disk space.
To Next Page
Loading...
Need help?
General
