OB/GYN
9-52 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Fetal Growth Curve Graph (continued)
To select the
measurement
To select which measurement you want to display on the Fetal
Growth Curve Graph, do one of the following:
• To select a specific measurement:
a. On the graph display, move the Trackball to the
Measurement Type field and press Set.
The system displays a list of measurements.
b. Move the Trackball to select the desired measurement
and press Set.
The system displays the Fetal Growth Curve Graph for
the selected measurement.
• To scroll through all Fetal Growth Curve Graphs, adjust the
Graph Change knob.
To select the age
to use
To plot the fetus age, the system allows you to use the
gestational age (GA) from the LMP, or to use the composite
ultrasound age (CUA). To select, adjust the Select GA knob.
The information in the left column changes between CUA and
GA(EDD), and the data may change.
To Next Page
Loading...
Need help?
General
