OB/GYN
9-58 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
To edit patient data
When you are working with graphs, you can change or enter the
following patient data.
• GA(LMP) – this field is computed using the LMP date on the
Patient Data Entry screen. To change this field:
NOTE: You can only change this field on the Fetal Growth Curve
Graph in single view.
a. Move the Trackball to the field, which is left of the
graph. To select the field, press Set.
The system displays a window with the GA weeks and
days.
b. To select each field, move the Trackball to the field and
press Set.
c. Type the correct weeks or days.
d. Select OK.
The system makes the following changes:
• GA (LMP) is now GA (GA) and shows the age you
entered.
• In the Patient Data section, the GA changes.
• In the Patient Data section, The EDD (LMP) changes to
EDD(GA) and shows an updated date, using the GA
you entered.
The LMP is erased.
• FetusPos – type information about the fetus position.
• PLAC – type information about the placenta.
To return from a graph to the scan display
After viewing graphs, to return to the scan display, do one of the
following:
• On the graph display, select Exit.
• On the Touch Panel, select Graph Display.
To Next Page
Loading...
Need help?
General
