GE LOGIQ 7 Basic User Manual

Cardiology Measurements
LOGIQ 7 Basic User Manual 10-13
Direction 2392206-100 Rev. 1
Left Atrium (continued)
One trace
measurements
• Left Atrium Area
• Diastolic (LAA(d))
• Systolic (LAA(s))
Making a trace
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the trace start point, press Set.
The system displays a vertical dotted line.
4. To trace the measurement area, move the Trackball.
A line shows the traced area.
5. To complete the measurement, press Set.
The system displays the measurement in the Results
Window.
One trace
measurement and
one distance
measurement
• Left Atrium Volume, Single Plane, Method of Disk
• Diastolic (LAEDV A2C) (LAEDV A4C)
• Systolic (LAESV A2C) (LAESV A4C)
Making a trace
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the trace start point, press Set.
The system displays a vertical dotted line.
4. To trace the measurement area, move the Trackball.
A line shows the traced area.
5. To complete the measurement, press Set.
6. To position the active caliper at the end point of the axis,
move the Trackball.
7. To complete the measurement, press Set.
The system displays the measurement in the Results
Window.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English