Cardiology
10-50 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Mitral Valve (continued)
One slope
measurements
• Mitral Valve Area according to PHT (MV PHT)
• Mitral Valve Flow Deceleration (MV DecT)
• Mitral Valve Pressure Half Time (PV PHT)
• Mitral Valve Flow Acceleration (MV AccT)
Making a slope
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the start point, press Set.
The system fixes the first caliper and displays a second
active caliper.
4. To position the second caliper at the end point, move the
Trackball.
A dotted line shows the slope.
5. To complete the measurement, press Set.
The system displays the slope measurement in the Results
Window.
To Next Page
Loading...
