Cardiology
10-52 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Mitral Valve (continued)
One time interval/
slope
measurements
• Mitral Valve Acceleration Time (MV AccT)
• Mitral Valve Deceleration Time (MV DecT)
Making a time
interval/slope
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the start point, press Set.
The system fixes the first caliper and displays a second
active caliper.
4. To position the second caliper at the end point, move the
Trackball.
A dotted line shows the slope.
5. To complete the measurement, press Set.
The system displays the time interval and slope
measurements in the Results Window.
To Next Page
Loading...
