Safety Precautions
LOGIQ 7 Basic User Manual 2-29
Direction 2392206-100 Rev. 1
Console Labels (continued)
Table 2-8: Label Location Explanations
1. Possible shock hazard. Do not
remove covers or panels. No user
serviceable parts are inside. Refer
servicing to qualified service
personnel.
2. Do not use the following devices near
this equipment: cellular phone, radio
receiver, mobile radio transimitter,
radio controlled toy, etc. Use of these
devices near this equipment could
cause this equipment to perform
outside the published specifications.
Keep power to these devices turned
off when near this equipment.
3. The equipment weighs approximately
200 kg (434 lbs). To avoid possible
injury and equipment damage when
transporting from one area of use to
another:
• Be sure the pathway is clear.
• Limit movement to a slow careful
walk.
• Use two or more persons to
move the equipment on inclines
or long distance.
4. Prescription Device (For U.S.A. Only)
5. The CE Mark of Conformity indicates
this equipment conforms with the
Council Directive 93/42/EEC.
6. CISPR CAUTION: The LOGIQ 7
conforms to the CISPR11, Group 1,
Class A of the international standard
for Electromagnetic disturbance
characteristics.
7. Voltage Range (Indication label)
8. Signal ground point label CAUTION:
This is only for “FUNCTIONAL
GROUNDING”, NOT “PROTECTIVE
EARTH”.
9. Power (Indication label)
10. Grounding reliability can only be
achieved when this equipment is
connected to a receptacle marked
“Hospital Only” or “Hospital Grade”.
(For U.S.A., Canada, Japan)
To Next Page
Loading...
Need help?
General
