Cardiology Measurements
LOGIQ 7 Basic User Manual 10-57
Direction 2392206-100 Rev. 1
Pulmonic Valve (continued)
Making a time
interval
measurement
1. Select the measurement.
The system displays an active caliper and a vertical dotted
line.
2. To position the caliper at the start point, move the Trackball.
3. To fix the first caliper, press Set.
The system displays a second active caliper.
4. To position the caliper at the end point, move the Trackball.
5. To complete the measurement, press Set.
The system displays the time interval in the Results
Window.
Two time intervals
measurements
• Pulmonic Valve Acceleration to Ejection TIme Ratio (PV
AccT, PVET)
• Pulmonic Valve Pre-Ejection to Ejection Time Ratio
(PVPEP, PVET)
To Next Page
Loading...
