Cardiology Measurements
LOGIQ 7 Basic User Manual 10-61
Direction 2392206-100 Rev. 1
System
The following are cardiac Doppler Mode System measurements:
One peak velocity
measurements
• Pulmonary Artery Peak Velocity (PV Vmax)
• Pulmonary Vein Velocity Peak A (reverse) (P Vein A)
• Pulmonary Vein Peak Velocity
• End-Diastolic (P Vein D)
• Systolic (P Vein S)
• Systemic Vein Peak Velocity
• End-Diastolic (PDA Diastolic)
• Systolic (PDA Systolic)
• Ventricular Septal Defect Peak Velocity (VSD Vmax)
• Atrial Septal Defect Peak Velocity (ASD Vmax)
Making a peak
velocity
measurement
1. Select the measurement; an active caliper with a vertical
dotted line displays.
2. To position the caliper at the desired measurement point,
move the Trackball.
3. To complete the measurement, press Set.
The system displays the velocity measurement in the
Results Window.
To Next Page
Loading...
