Cardiology Measurements
LOGIQ 7 Basic User Manual 10-65
Direction 2392206-100 Rev. 1
Tricuspid Valve (continued)
One velocity flow
trace
measurements
• Tricuspid Regurgitant Mean Pressure Gradient (TR Trace)
• Tricuspid Regurgitant Mean Velocity (TR Trace)
• Tricuspid Regurgitant Mean Square Root Velocity (TR
Trace)
• Tricuspid Regurgitant Velocity Time Integral (TR Trace)
• Tricuspid Valve Mean Pressure Gradient (TV Trace)
• Tricuspid Valve Mean Velocity (TV Trace)
• Tricuspid Valve Mean Square Root Velocity (TV Trace)
• Tricuspid Valve Velocity Time Integral (TV Trace)
Making a velocity
flow trace
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the trace start point, press Set.
The system displays a vertical dotted line.
4. To trace the envelope, move the Trackball.
A line shows the traced area.
5. To complete the trace, press Set.
The system displays a second vertical dotted line.
6. To position the second dotted line at the start of the next
envelope, move the Trackball.
7. To complete the measurement, press Set.
The system displays the measurement in the Results
Window.
To Next Page
Loading...
Need help?
General
