Vascular
11-8 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Control Assignment (continued)
Modify Auto Calcs When you select this key, the Modify Calculation menu is
displayed as below. In this menu, you select parameters to
display in the Auto Vascular Calculation window. Only
parameters that can be used by the calculation are displayed.
Select Save as Default to save the selected parameters as the
default calculations for this application.
Select Return to return to the previous Touch Panel screen.
If you select PV, all selected parameters are turned off. When
you deselect PV, the system returns to the previously selected
calculation.
Figure 11-5. Modify Auto Calculation Menu (Page1)
To Next Page
Loading...
