Vascular
11-20 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Acceleration
1. Select Accel.
The system displays an active caliper with vertical and
horizontal dotted lines.
2. To position the caliper at peak systole, move the Trackball.
3. To fix the measure point, press Set.
The system displays a second active caliper.
4. To position the second caliper at end diastole, move the
Trackball.
5. To complete the measurement, press Set.
The system displays the peak systole, end diastole,
acceleration time, and acceleration in the Results Window.
Acceleration Time (AT)
1. Select AT.
The system displays an active caliper and a vertical dotted
line.
2. To position the caliper at the start point, move the Trackball.
3. To fix the first caliper, press Set.
The system displays a second active caliper.
4. To position the caliper at the end point, move the Trackball.
5. To complete the measurement, press Set.
The system displays the acceleration time in the Results
Window.
Heart Rate
See ‘Heart Rate’ for more information.
To Next Page
Loading...
Need help?
General
